LNS Super Hydrobar HS 3.26, Instruction Manual

Page: 27 / 44

CHAPTER 2: DESCRIPTION 2-21
SUPER HYDROBAR HS
2.3. MAINTENANCE
Please read the safety instructions provided at the beginning of this manual before
handling the following devices.
2.3.1. Hydraulique
The SUPER HYDROBAR HS hydraulic unit is fitted with an oil-return filter with a 200

mesh.
The filter needs cleaning as soon as the oil in the collector is not reabsorbed. The cleaning frequency
depends on the kind of material and state of cleanliness of the bars.
Never work without a filter or with a pierced filter because the pump and the
hydraulic unit could be damaged by the metal particles, in which case all
guarantees are invalidated.
It is important to clean the bars (even briefly) before loading them on the feed system magazine.
Excessive dirt can form a deposit at the base of the bar feed system, which can in turn slow the oil return.
The oil tank must be drained at least once a year.
2.3.2. Cleaning
As with any vehicle, machinery, or device, regular cleaning of your bar feed system can only serve to
improve its operation and prolong its useful life.
For cleaning on the outside, use a soft cloth and a regular detergent; for the inside, use a cloth or a brush.
However, make sure that the rollers and parts made of synthetic materials do not come into contact with
these products.
The use of compressed air for cleaning is not advisable, because particles could become lodged in
sensitive areas and impede the proper operation of the bar feed system.
At no time should solvents, such as acetone, or diluents be used for cleaning the bar
feed system. At no time should cleaning products come into contact with electrical
components.
2.3.3. Spare parts
Without the written consent of LNS SA, no addition or modification of the machine or spare parts can be
undertaken.
LNS SA assumes no responsibility when using spare parts which were not provided by LNS SA.