6
START UP MANUAL
QUICK LOAD SERVO III
2.2
Top-cut position
During the loading cycle, the bar is
automatically loaded and positioned into
the spindle, outside the clamping device of
the lathe (chuck or actuator).
This positioning corresponds to a value (Z)
programmed by the operator, which is
equal to the distance between the
measuring cell and the position of the
material in the lathe clamping device.
With this system, the setting is the same for
any bar length.
Top cut position setting :
Important :
Before handling the barfeeder, stop the lathe at the end of part cycle.
1.
Press the key
[STOP]
.
2.
Press the key
[MENU]
.
The display reads :
3.
Press the key
[3]
for
Position / Torque.
The display reads :
M A I N M E N U
1 : P A R T S E T U P
2 : A P P L I C A T I O N S E T U P
3 : P O S I T I O N / T O R Q U E
4 : M I S C E L L A N E O U S
F U N C T I O N S
5 : S E R V I C E
E N D O F B A R P O S I T I O N :
3 9 . 3 7 I N C H E S
