LNS HYDROBAR SPRINT 555, Troubleshooting And Spare Parts Manual

Page: 74 / 111

3-8 Chapter 3: Procedures
HYDROBAR SPRINT 555
Step 7: Press F1 (+/-) to enter by offset correction.
Step 8: Enter the correction value with the numerical keys. Then press the F1 key (+) to add the value, or press the F4 key (-) to
subtract it. The display will read the new top cut position.
Step 9: To exit the top cut set mode, press F2 (ESC).
By Teach In:
Step 1: On a clear screen, press F1 (MANUAL MODE).