LNS HYDROBAR SPRINT 555, Troubleshooting And Spare Parts Manual

Page: 72 / 111

3-6 Chapter 3: Procedures
Step 4: On the next screen, press F2 (TEACH IN) to teach in the end of bar position.
Step 5: Position the headstock on the lathe in the forward cut-off position (normally ½” from the guide bushing). This position will
give you the shortest remnant length. Certain applications may require different settings.
Step 6: Press and hold the F-key corresponding to the pusher forward icon until the pusher is ½” behind the main collet.
Step 7: Once the desired position is reached, press and hold F3 (ENTER) to set the end of bar position.
Step 8: Press F2 (ESC) to exit the menu.
Procedure complete.
HYDROBAR SPRINT 555