LMT FETTE T18F, Operating Manual, Page: 7 / 60

Operating Manual
Tangential Rolling System T18F - T27F
3
www.lmt-fette.com
2 Safety
General safety instructions
The tangential rolling system was constructed in compliance with all binding rules and
regulations and safety standards. It complies with the current state of technology and
EC conformity requirements.
■
The tangential rolling system must be put into operation in accordance with the
Operating Manual.
■
The general safety instructions for processing machines (machine room) apply.
■
Operating personnel must be trained using this Operating Manual. Successful com-
pletion of training must be confirmed in writing. This applies in particular to operat-
ing personnel without knowledge of the respective national language or national
writing system.
■
For the replacement of spare parts only original LMT Fette spare parts must be
used for safety reasons.
Residual dangers
Even if the tangential rolling system is used as intended, it is not possible to exclude
all dangers.
Such dangers not only arise from the tangential rolling system itself, but generally
through negligence or operating errors.
Make sure to observe
■
the general legal and operational safety regulations pertaining to the use of a
tangential rolling system.
■
the universally recognized technical rules to ensure safe and professional working
practices.
■
all the safety instructions in this Operating Manual.
■
the safety markings on the tangential rolling system.
■
the accident prevention regulations.
■
the environmental protection regulations.
Obligations of the operator
■
The operator is responsible for ensuring that the tangential thread rolling head is used
as intended, that the safety regulations are adhered to and that this Operating Manual
is always accessible to personnel for consultation at all times.
■
The operator must ensure that all persons commissioned by him to perform com-
missioning work, operation and maintenance tasks have read and understood this
Operating Manual.
■
The operator is required to provide all the necessary protective equipment for the
personnel.
Authorized personnel, operating personnel training
All operating personnel must have the required training for their tasks and meet the
requirements for using the tangential rolling system. The valid regulations concerning
the occupational safety and protection of minors must be observed.
LMT_Bedienungsanleitung_T18F_T27F_e.indd 3 02.08.11 17:40