G Series Gas Grills
LTR50001050, Rev. M
Appendix
www.calflamebbq.com
30
You will need:
• 7mm wrench, socket, or nut driver
• One or two 1.75mm orifices (depending on
your side burner)
• Pipe compound suitable for natural gas
a. Remove the grate, burner cap and burner
diffuser from the side burner.
b. Using a 7mm wrench, remove the orifice for
the burner.
c. Apply a small amount of pipe compound to
the orifice threads.
d. Screw in the orifice until it is finger tight.
e. Tighten the orifice with the 7mm wrench.
f. If you have dual side burners, repeat the
previous steps for the second burner.
2 . Replace the side burner orifices
3 . Mark the rating plate
After conversion has been completed, mark the
rating plate as NG with an indelible marker.
