INSTALLATION
21
Step 3. Connecting Monitor Port (Optional)
You can connect LAN port to the manager clinet system, if you
want to configure and manage the RAID storage from the clinet
system through out-of-band manager.
• LAN Port Connection
User can remote manage the RAID enclosure without adding
any user specific software (platform independent) via standard
web browsers directly connected to the 10/100Mbit RJ45 LAN
port. Connect LAN port of the ThunderBox 800 using the in-
cluded Ethernet cable and then to a LAN port or LAN switch.
Step 4. Connecting RAID Storage Power
To power the RAID storage:
1. Using the included power cord, connect this power cord to a
grounded electronical outlet and to the ThunderBox 800.
2. ThunderBox 800 will automatically turn on when host
computer power on status is received from the thunderbolt
cable. It takes about 30 seconds to fully start up the RAID stor-
age.
Figure 2-7, Thunderbolt Computer Daisy Chain