LMI Technologies GoMax Smart Vision Accelerator, User Manual

Page: 6 / 47

GoMax Smart Vision Accelerator: User Manual Introduction • 6
Interface
As with Gocator sensors, you configure GoMax using an intuitive web interface.
The GoMax interface, listing four accelerated sensors
Click the icons at the top of the web interface to switch between pages, which contain a high level
grouping of settings and functionalities. In panels such as the
Manage panel shown above, click the
categories to the left to switch between lower level groupings of settings.
Element Description
1 Manage page Contains settings and controls (in the Manage panel) to start and stop
acceleration, change network settings, and perform maintenance on the
GoMax unit. For more information, see the Manage panel categories
listed below.
2 Dashboard page Provides monitoring of the GoMax unit's health. For more information,
see Monitoring GoMax Health Status on page 33.
3 CPU Load and Speed Provides important GoMax metrics.
4 Sensor System category Lets you start and stop acceleration of sensors. For more information, see
Starting and Stopping Acceleration on page 27.
5 Networking category Contains settings for configuring the network. For more information, see
Configuring Network Settings on page 35.