5 (8)
Assembly instructions | LK Wallbox UNI Push AX16 V2 and AX20
2.2. Mount the wall boxes on the plate using the
screw included as in the picture above. Pass the
screw through the large hole in the plate and th-
rough the box so that it tightens in the small hole.
2.3. The stud must be jacked out 5 mm behind the
whole plate to provide space for the plate reinfor-
cement profile.
2.4. Attach the plate to the stud using four screws,
(not included).
2.5. Continue to mount the box according to
step 1.4.
Disassembling the PushFit coupling
In the event of disassembly,
LK Disassembly Tool
(Article no. 188 06 45 for 16 mm) or 188 06 46 for
20 mm) or
LK SmartTool AX
(Article no. 188 25 49)
must be used. If the same pipe needs to be reassem-
bled, the pipe ends should be checked so that the
coupling’s grab ring has not damaged the pipe. In
this case, the pipe should be cut at least at the inser-
tion depth which has been marked.
LK Wall Support for Wallbox UNI Push
When two wall boxes are to be mounted in a
stud construction,
LK Wall Support Wallbox
UNI Push 160
(Article no. 188 07 42) or
LK Wall
Support Wallbox UNI Push 150
(Articel no.
188 07 43), can be used. LK Wall Support attaches
the boxes and provides the correct c/c distance
between them. LK Wall Support UNI Push is sui-
table for stud separation dimensions of 300 mm
or 450 mm.
2.1. Bend out the attachment lugs on the plate.
EN.29.C.46.20200318