Rico Buggy edition 1
page 17
NOTE!
When adjusting the angle of the backrest it is crucial to be particularly aware of
the risk and pay particular attention to the fact that hands may be trapped by the
moving components.
NOTE!
Due to considerable
adjusting
possibilities of the stroller, when regulating the
angle of the backrest, it is possible to obtain a position when the head of the child is on
the level lower than the pelvic line. It is forbidden to use this particular position, as this
puts the child at risk of choking or aspiration.
13.2
Adjusting the height of the backrest
In order to adjust the height of the backrest Fig. 17 loosen the knobs (1) blocking the chest support, as well as the blocking
screws (2). Set the desired height of the backrest and then secure it by retightening the screws (2). Set the chest supports in their
proper position and retighten the screws (2) blocking the chest supports.
Fig. 17
13.3
Adjusting the height of the chest support
In order to adjust the height of the chest supports (2) loosen the knobs (1) Fig. 18 and then adjust the position of chest
supports (2). After setting the desired position of the supports, retighten the knobs (1), which block the movement of the chest
support. Position of the right and the left chest support is independent, and these chest supports may be adjusted individually.
