www.livoo.fr
you can then set the minimum alert temperature. The "Lo" icon flashes when you can set this
temperature.
You can set maximum and minimum alert temperatures for each of the 3 channels that the station has.
First select the channel you want to set before setting the maximum and minimum alert temperatures
(see outdoor sensor section).
Lighting
When you power the station with batteries, press the " SNOOZE / LIGHT " button to activate the backlight
for 15 seconds. After this time, the unit will revert to power conservation mode.
If you power the unit with the power cord, the unit will not switch to power conservation mode. The
lighting always remains the same.
The "BACKLIGHT" switch (button B10 figure 2) on the back of the unit allows you to choose between two
screen illumination modes: "HI" for strong illumination, "LO" for soft illumination.
USB charger
The USB slot produces a continuous power charge. You can connect a USB charging cable to this slot to
charge your mobile devices (not included).
Cleaning and maintenance
Clean the station and outdoor sensor with a slightly damp, non-cottony cloth. Do not use detergents or
soap to clean these units.
If you are not using the unit, unplug it or remove the batteries.
Do not use both battery and AC power simultaneously.
In case of malfunction, contact our service department by following the contact information on our
website livoo.fr
