Instruction Manual
12
Figure 5
STORAGE AND CLEANING
Rust spots may appear on the product due to the metallic particles contained in the stainless steel used in the
manufacture of this product. We recommend that you brush them off quickly to limit their spread.
After each firing, wait for the product to cool down completely.
Empty the grease trap and clean your appliance and utensils after each use to avoid a highly flammable and toxic
grease deposit on the cooking surfaces.
Do not use sharp objects or abrasive cleaners on the cooking surface. It is preferable to use a heavy-duty
degreaser.
Do not leave standing water in the appliance; this can lead to rust and rapid deterioration of the materials.
Protect your appliance with a cover if you leave it outside in fine weather. Protect from rain and moisture during
extended periods of non-use.
Before use, check the hose for nicks, cracks and signs of severe wear. Make sure the expiry date has not passed.
Carry out a leak test at the beginning of each season and each time you replace the cylinder to ensure that the
appliance and its connections are working properly.
NEVER USE AN OPEN FLAME TO DETECT GAS LEAKS. DO NOT LIGHT THE APPLIANCE DURING THE TEST.
Turn all appliance controls to STOP, Connect your gas cylinder correctly, Open the gas cylinder valve.
To detect a leak, brush a solution of equal parts liquid soap and water over all the gas connections (valves, hose,
regulator and hex nut).
If bubbles form anywhere, this indicates a leak.
Summary of Contents for DOC279
Page 6: ...17 18 ...
