background image

13MM 

HAMMER

DRILL

1010W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor:  

1010W

Input: 

 

230V ~ 50Hz

Chuck Size:   

13mm (

1

/

2

”) Keyed

No Load Speed: 

0-3,000/min

Impact Rate:  

0-48,000bpm

Max Drilling Capacities:  Timber 32mm
  Steel 

16mm

  Masonry 

13mm

Weight (Tool Only): 

2.1kg

HDR-1100

WHAT’S IN THE BOX

Hammer Drill

IN ORDER TO MAKE A CLAIM UNDER THIS 

WARRANTY YOU MUST RETURN THE PRODUCT 

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH 

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY 

PLEASE TELEPHONE OUR CUSTOMER SERVICE 

HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE 

HAVE THE MODEL NUMBER AND DATE OF 

PURCHASE AVAILABLE. A CUSTOMER SERVICE 

REPRESENTATIVE WILL TAKE YOUR CALL  

AND ANSWER ANY QUESTIONS YOU MAY  

HAVE RELATING TO THE WARRANTY POLICY  

OR PROCEDURE.

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition  
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded  
at law. You are entitled to a replacement or refund for a major failure 
and for compensation for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods repaired  
or replaced if the goods fail to be of acceptable quality and the failure 
does not amount to a major failure. 
Generally you will be responsible for all costs associated with  
a claim under this warranty, however, where you have suffered  
any additional direct loss as a result of a defective product you  
may be able to claim such expenses by contacting our customer 
service helpline above.

ozito.com.au

Depth Rod

22 x Drill Bits & 
1 x Counter Sink Bit

27 x Driver Bits

Side Handle

0217

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the 

original date of purchase 

and is

 

intended for DIY (Do It Yourself) 

use only.

 

If a product is defective it will be replaced in accordance 

with the terms of this warranty. Warranty excludes consumable 
parts, for example: carbon brushes, depth rod, drill bits etc.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other  

than that specified on the tool.

•   If the tool shows signs of damage or defects caused  

by or resulting from abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the 

instruction manual.

•   If the tool is disassembled or tampered with in any way.

Chuck Key & Magnetic 
Bit Holder

5 x T

imber

Drill Bits

11 x Steel

Drill Bits

6 x Masonry

Drill Bits

5 x T

imber

Drill Bits

11 x Steel

Drill Bits

6 x Masonry

Drill Bits

5 x T

imber

Drill Bits

11 x Steel

Drill Bits

6 x Masonry

Drill Bits

Summary of Contents for HDR-1100







Reviews: