Instruction Manual
7
3.
Never place any object on the unit that could interrupt the air flow and affect its proper
operation.
Using the appliance
1.
Connect the mains plug into an earthed wall socket.
Note:
We recommend that you preheat the machine before putting in the ingredients. Then wait until the
heat indicator goes off. We recommend that you preheat the machine before putting the ingredients in.
Then wait until the heat indicator goes off.
2.
Then place your food in the different dishes or spits you wish to use and choose one of the 16 pre-
set programs. Once selected, press the ON/OFF button. The temperature and timer will start
automatically. Place the ingredients in the basket.
3.
When the appliance has reached the programmed temperature, it will stop heating. The red cooking
indicator will turn off to indicate that the fryer has stopped heating. When the temperature inside
the fryer decreases, the fryer will then turn on again to maintain the desired temperature.
4.
When you hear the beep, the cooking time is up. Remove your food from the appliance and place it
on a heat-resistant surface.
Note
: You can also stop the cooking manually by simply pressing the ON/OFF button during the cycle. After
several minutes of non-use, the oven will shut down completely.
5.
Check to see if the ingredients are done. If you want to cook them longer, put them back in the oven
and set the timer for a few more minutes.
After cooking, the drawer and ingredients are still hot. Depending on the different ingredients, hot steam
may escape.
Tip: You can use tongs to remove large or fragile ingredients from the basket.
6.
The oven is now ready to cook your food again.
To change the temperature: once the program is chosen, if the temperature is not to your liking, you can
change it by pressing the "TEMP °C" button. Once the temperature is flashing, use the on/off button to select
the temperature you want. Once selected, press the TEMP °C button again and a beep will sound to alert
you to the temperature change.
To change the cooking time: once the program has been chosen, you can change the time pre-set in the
program. Just click on "TIME" and use the on/off button to choose the time you want. Once selected, press
