Living Flame Thermoflow, Installation Manuallines And Operating Instructions

Page: 15 / 50

Living Flame Thermoflow Fireplace Installation Instructions Page 15
Living Flame 2012
Owner
Annual Safety Service
Service objective
Every Living Flame Fire should look and operate at its best
Check Meter or Cylinders
Pressure Drop Test Gas Lines
Inspect Inbuilt Fireplace
Dismantle Fireplace and Inspect Components
Clean all Components and Body
Check Operation of Controls and Safety Devices
Check Flue System is Clean
Check Flue Vent
Re-assemble Fire
Check Ignition System, Perform Lighting Test, minimum 20 out of 20
Check Injector and Pressure Settings
Check Fire Effect, Flame Distribution and Height of Flame
Check Complete Assembly
Test Flue Vent System
Check Complete Operation of the Fire
Final Clean and Dust
Re-light all Other Gas Appliances
Re-demonstrate Fireplace to ensure owner has full understanding of the Fireplace
Sign off Service Sheet with owner
Re-Spray body and components, - if required. This is extra to the Annual Service Check
Maintenance
Living Flame Fireplaces must be maintained, cleaned and re-commissioned annually as
should all gas appliances.
Domestic Users
Living Flame Fireplaces should be inspected, cleaned, serviced and re-commissioned at
least once yearly throughout the lifetime of the fire to maintain the guarantee.
Commercial Users
Living Flame Fireplaces should be inspected, cleaned, serviced and re-commissioned at
least twice yearly throughout the lifetime of the fire to maintain the guarantee