Desired setting will be confirmed 3s after the operation.
Tri-color light will reflect the environment humidity: Red light: RH%
＞
65%;
Green light: 55%
≤
RH%
≤
65%; Yellow light: RH%
＜
55%
.
Switch On / Switch Off The Unit [ Power button ]
Connect to the power supply and press the power button once to turn on the unit, the unit runs by
default mode on manual continuous dehumidifying with low fan speed.
Auto Shut-off Timer Function [ Timer button ]
Press the timer button, then press up/down buttons to select your preferred number of hour from 00-24-00
The appliance will shut off automatically once the selected number of hours is reached.
Auto timer function will be canceled if
the timer button is pressed twice in 5 seconds.
Auto timer function will be canceled if the appliance is switch off and on again.
Humidity Setting [ Up and Down buttons ]
Press the up/down buttons to select your preferred humidity from CO-30%-35%-40%-45%- 50%
-55%-60%-65%-70%-75%-80%-CO. CO means continuous dehumidifying regardless of ambient
humidity.
Operation Instructions
Press the power button to turn the unit off, the fan will continue to operate for a few seconds to
blow out the hot air inside the unit.
(2S)
(2S)
(2S)
NZ
SALES
AFTER
SUPPORT
0800
422
274
8
