If the dehumidifier will not be used for a long period of time, take the following steps:
1.
Remove the plug from the socket and empty the tank. Allow the tank and the dehumidifier to dry
completely, This may take a couple of days.
2.
Clean the air filter .
3. Check the dehumidifier for damage.
4. Pack the device with the suitable packaging.
5.
Store the dehumidifier in a dust-free and out of direct sunlight location, preferably covered with a
sheet of plastic.
Storage
Display Code
E1
E2
Error
Temperature sensor error
Humidity sensor error
Display
Flash every 30 seconds
Flash every 30 seconds
What is happening
Device still dehumidifies but is in
defrost mode only.
Device still dehumidifies but is in
continuous dehumidifying mode
only.
Please contact local distributor if any of the error codes below appears.
Display Error Codes
NZ
SALES
AFTER
SUPPORT
0800
422
274
13
