page 9 of 29
5.4 Further initial settings
You can turn the display (right-handed/left-handed users) with the “+”key (paghe
4, fig. 1/3). With the key “laser” you can turn off the fans (Our recommendation:
only work with activated fans).
5.5 Display of saved therapy parameters
By pressing the “SET” key, the currently set parameters (initial setting) of the
unit are displayed. With first use you'll be indicated the following initial settings:
The maximum output of 50 mW, the operation mode Multi and an energy dose
of 15 J/LD (LD = laser diode) are preset when operated for the first time.
Following this the laser power values selected and stored previously will be
displayed, as well as the therapy program and therapy dose used the last time.
Changing the laser parameters:
Chapter 6.0 “Changing of laser parameters” (page 10 ff)
Activating the laser:
Chapter 7.0 “Using the Laser” (page 14 ff)
50mW 15 J/LD
MULTI