8
9
ASSEMBLY
STEP 3
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
BOLT (D)
45 mm
Qty: 4
HARDWARE BAG 3
CONTENTS :
BOLTS (D)
CONSOLE MAST
CONSOLE CABLES
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
SPRING WASHERS (B)
FLAT WASHERS (C)
A
Disengage the
deck lock latch
with your
foot to lower the
running deck
.
B
Open
hardware bag 3
.
C
gently place the
console
on top of the
console masts
. Attach the
left side
first
using 2
bolts (d)
, 2
spring washers (b)
and 2
flat washers (c)
.
D
Connect the
console cables
, carefully
tucking wires in masts to avoid damage.
E
Attach the
right side
of the
console
using 2
bolts (d)
, 2
spring washers
(b)
and 2
flat washers (c)
.
F
Before the first use, lubricate the treadmill
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
gUIDE.
NOTE: Be careful not to pinch any wires
while assembling the masts.
YOU ARE FINISHED!
TREADMILL OPERATION
This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the
TREADMILL gUIDE has instructions for the following:
•
LOCATION OF THE TREADMILL
•
USING THE SAFETY KEY
•
FOLDING THE TREADMILL
•
MOVING THE TREADMILL
•
LEVELING THE TREADMILL
•
TENSIONING THE RUNNING BELT
•
CENTERING THE RUNNING BELT
•
USING THE HEART RATE FUNCTION
LS7.9T_OM_Rev1.2.indd 8-9
9/9/09 10:18 AM
