Livestrong LS10.0E, Owner'S Manual

Page: 18 / 128

18
NOTE: All hardware for this step is pre-installed.
A Remove PRE-INSTALLED HARDWARE from
CONSOLE .
B Attach the CONSOLE CABLES to the CONSOLE .
C Carefully tuck the CONSOLE CABLES into the
CONSOLE MAST before attaching the CONSOLE .
Attach CONSOLE to CONSOLE MAST using 4 PRE-
INSTALLED BOLTS .
D Slide HANDLEBAR COVER over bottom of UPPER
HANDLEBAR .
E Slide UPPER HANDLEBAR onto LOWER
HANDLEBAR making sure handlebars are joined
together completely. Secure UPPER HANDLEBAR to
LOWER HANDLEBAR using PRE-INSTALLED SET
SCREWS .
F Slide HANDLEBAR COVER down to cover hardware.
G Repeat steps D–E on other side.
CONSOLE
PRE-INSTALLED BOLTS
UPPER HANDLEBAR
HANDLEBAR COVER
CONSOLE CABLES
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
CONSOLE MAST
NOTE: Be careful not to pinch any wires while attaching
the console. Make sure upper handlebars are as far down
as possible. Handlebars can be damaged if not secured
correctly.
ASSEMBLY STEP 8
LS13.0E, LS15.0E SHOWN
ASSEMBLY COMPLETE!
LS10.0E UPPER
HANDLEBAR AND
HANDLEBAR COVER