10 GB
power drill in the manual for
the power drill. Death or injury
due to electric shock may
otherwise result.
When selecting the mounting loca-
tion, pay attention to the following:
Make sure that the spotlight
1
illuminates the desired area.
You can move the spotlight
1
vertically.
Make sure the motion detector
9
covers the desired area.
The motion detector
9
has a
maximum coverage range of
12 m, with a coverage angle
of about 180° (depending on
the mounting height – a height
of 2.50 m is ideal) (Fig. D).
Make sure the motion detector
9
is not illuminated at night
by street lighting. This can influ-
ence its functioning.
During mounting, proceed as
described below:
Unscrew locking screw
5
by
using a screw driver (cross
type) to detach the mounting
stirrup
4
from the spotlight
1
.
Hold the mounting stirrup
4
so that it is horizontal (possibly
with a spirit level) against the
wall and mark the fastening
holes.
Now drill the fastening holes
(Ø 6 mm) and push the wall
plugs into the drill holes (Fig. A).
Secure the mounting stirrup
4
onto the wall using the screws
provided.
Now use the screw driver (cross
type) to attach the spotlight
1
to the mounting stirrup
4
by
using the previously removed
locking screw
5
, spring washer
2
, and metal nut
3
(Fig A).
Open the connection box
6
after you have released the lid
of the connection box
6
with
a cross type screwdriver.
Insert the connection cable (not
include in the product), type
H05RN-F 3G 1.0 mm
2
, through
the cable gland
7
and into
the connection box
6
. The
length for the connection cable
line should not exceed 2.5 m.
Fix the connection cable with
the cable clamp
14
first and
Summary of Contents for HG03444A
Page 3: ...B 12 11 10 A 6 7 9 4 1 2 3 5 8...
Page 4: ...2 5 m D C 13 14...
