42 GB/MT
sources will only switch on due to the time or
movement during the night.
Preparing the product
prior to initial use
Note:
The product features a twilight sensor and
an On / Off switch
6
. When fully charged the
product on time is approx. 6 to 8 hours.
Unscrew the sphere
4
from the solar module
5
counter-clockwise. Set the On / Off switch
6
to the ON position before using it for the
first time.
Screw the sphere
4
clockwise all the way
into the solar module
5
and place the prod-
uct in the sun.
Switching the product on / off
Slide the On / Off switch
6
to the ON position.
The product will automatically switch on at
dusk. At dawn the product will automatically
switch off.
Slide the On / Off switch
6
to the OFF posi-
tion. The product is permanently switched off.
Replacing the
rechargeable battery
Note:
The rechargeable battery
11
is designed
for prolonged operation. However, it may need to
be replaced after being used for a long time. Re-
chargeable batteries are subject to natural wear
and the output may decrease. For optimal perfor-
mance the batteries should be replaced every
12 months.
Replace the rechargeable battery as shown in
figures D–F.
Unscrew the sphere
4
counter-clockwise.
Slide the On / Off switch
6
on the solar
module
5
to the OFF position.
Remove the solar module
5
from the spacer
tube
2
or
3
.
Loosen the two screws
7
on the underside
counter-clockwise using a suitable cross-tip
screwdriver and remove the housing
8
from
the remainder of the module (see Fig. D).
Then also loosen the three screws
9
on the
underside of the cover counter-clockwise us-
ing a suitable cross-tip screwdriver and remove
the cover
10
from the remainder of the module
(see Fig. E).
Remove the rechargeable battery
11
and re-
place with a new, charged rechargeable bat-
tery of the same type (see „Technical data“).
Please note the polarity (+ / -) when inserting
the rechargeable battery (see Fig. F).
