7
GB
Introduction / Safety
Parts Description
1
Reflector
2
Flexible lamp arm
3
Base
4
ON / OFF switch
5
Mains plug
Technical Data
Model no.:
14122205L, 14122206L
Operating voltage:
230 - 240 V ~ 50 Hz
Rated output:
7.5 W
Lamp:
1 x LED module
Protection class:
II /
Safety
Safety notices
Damage due to failure to comply with these operating
instructions will invalidate the warranty! We assume
no liability for consequential damage! We assume
no liability for material damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
RISK OF FATAL
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND
SMALL CHILDREN!
Never leave children
unattended with the packaging material. The
packaging material represents a danger of suf-
focation. Children frequently underestimate the
dangers.
Do not leave the light or packaging material ly-
ing unattended. Plastic film or bags, plastic parts,
etc. are dangerous for children to play with.
This device may be used by children age 8 years
and up, as well as by persons with reduced phys-
ical, sensory or mental capacities, or lacking
experience and / or knowledge, so long as they
are supervised or instructed in the safe use of
the device and understand the associated risks.
Children should not be allowed to play with the
device. Cleaning and user maintenance should
not be performed by children without supervision.
Avoid the risk of fatal injury
from electric shock
Check the lamp for possible damage before
every use. Never use the light if it shows any
signs of damage.
A damaged light means danger
of death from electric shock. In the event of
damage, repairs or other problems with the light
please contact the service centre or a qualified
electrician.
The external flexible cord on this light is not
replaceable; if the cord is damaged the light
must be disposed of.
Verify the existing mains voltage matches the
required operating voltage of the lamp (see
„Technical Data“) before use.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Always unplug the lamp from the mains prior
to assembly, disassembly, cleaning or if the
lamp will not be used for extended periods.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
The illuminant in this light must be replaced by
the manufactured or an authorised technician
or similarly qualified person.
This light is not suitable for dimmer
or electronic switches.
Prevent fire and
injury hazards
Do not look into the illuminant from a close
distance during operation.
Do not look at the LED with an optical instru-
ment (e.g. magnifier).
Do not cover the lamp or the mains plug with
objects. Excessive heat can result in a fire.
Do not operate the lamp unattended.
Introduction
