LIVARNO LUX LSL 10 A4
English - 17
Run the power cable [6] through the cable gland [5].
Connect the power cable [6] using the screw terminal [7]. Make sure that
the individual wires of the power cable [6] are connected correctly.
Wire
Symbol
Designation
Black or brown
L
Phase
Blue N
Neutral
Yellow/green
Earth conductor
Then screw the power cable [6] with the rubber seal tightly in the cable
gland [5].
Close the junction box [2] by screwing the cover again tightly with the
four screws that you previously removed. When closing the junction box
[2], ensure that the sealing ring lies correctly in the groove. Otherwise, IP
protection is not guaranteed.
Fissare ora il faro LED alla staffa di montaggio [4]. Utilizzare le viti [3] in
precedenza staccate, gli anelli elastici e le rondelle. Attenzione: le
rondelle devono essere posizionate tra il faro LED [1] e la staffa di
montaggio [4]. Gli anelli elastici devono essere situati tra la testa della
vite e la staffa di montaggio [4].
7. First use
After you have installed the LED spotlight as previously described, you can
connect the circuit again. You can now switch the LED spotlight on and off
via the corresponding light switch of your home lighting system.
8. Cleaning / maintenance
8.1. Maintenance
The light bulb of the LED spotlight is a long-lasting LED. It cannot be
replaced and does not require maintenance.
The light source of this light cannot be replaced; when the light source has
reached the end of its service life, the entire light must be replaced.
8.2. Cleaning
Ensure that no liquid can penetrate the
housing. There is a risk of an electric shock.
To clean the LED spotlight, use a soft, dry cloth and never use any solvent or
cleaner that would corrode the plastic materials. Use a slightly damp cloth
for more stubborn dirt.
