25
GB/IE
Replace the rechargeable batteries if the light output does not improve
after charging (Fig. E).
Assembly
Note:
Before mounting, decide where you want to mount the solar cell
5
and the main unit
1
. Please remember the connection cable between the
solar cell and the main unit is approx. 2.5 m long.
Mounting the main unit
Please remember when selecting the location for mounting the main unit
1
:
1. The connection between the LED spotlight
2
and the main unit is flexi-
ble and should be able to illuminate the selected area. Please remem-
ber to slightly loosen the swivel screw before moving the LED spotlight.
Tighten the swivel screw afterwards (see Fig. F).
2. Depending on the mounting height (ideally between 1.80 m – 2.00 m)
the motion detector
3
has a detection range of max. 12 m with a de-
tection angle of 90° horizontally and 90° vertically.
3. Be sure the motion detector is not illuminated by street lighting at night.
This can influence its functioning.
Secure the main unit
1
using two of the enclosed wall plugs
8
(ø 6 mm) and two of the enclosed screws
7
(4 x 30 mm) (see Fig. B).
Note:
The enclosed mounting material is suitable for ordinary masonry
construction. Other wall substrates may require other fastening materi-
als. Seek specialist advice when in doubt.
After mounting, check that the main unit is fitted securely.
Summary of Contents for 282514
Page 3: ...B C D 7 9 7 8 8 A 1 4 5 2 3 6 4...
Page 4: ...E F 10 11...
