14 GB/IE
Safety / Preparing the product for use / Care and cleaning / Disposal
Disposal / Warranty and Service
The illuminant in this light is not replaceable; if
the illuminant reaches the end of its services life,
replace the entire light.
Working safely
Install the light so that it is protected from
moisture and dirt.
Prepare carefully before assembly and allow
yourself enough time. Lay out all the individual
components and additional tools or materials
required so that you can see and reach them.
Remain alert at all times and always watch what
you are doing. Always proceed with caution
and do not assemble the lamp if you cannot
concentrate or feel unwell.
Preparing the product for use
Assembling the lamp
Note:
You will require a second person to help with
the assembly of the product.
Note:
Please ensure that you pull the cable during
fitting slowly through the base.
Remove the transport locks
5
from the tube
2
.
Connect the sections of tube
2
and screw in
place.
Note:
Be sure to screw the tubes
2
as far in
as possible to ensure the light is stable.
Be sure not to pinch the mains lead running
through the tube
2
.
Insert the tube
2
into the base
6
and screw
in place.
Tighten the nut
7
at the underside of the
base
6
.
Note:
Be sure to hold the tube
2
tight when
tightening the nut
7
.
Note:
Be sure the cable is inside the designated
opening in the base
6
so it cannot be pinched.
Plug the mains plug
9
into a socket that has
been professionally installed.
Your light is now ready for operation.
Switching the lamp on / off
Use the touch switch
11
to switch the uplight
on or off.
Touching the touch switch
11
repeatedly will
dim the uplight.
Use the ON / OFF switch
10
to switch the
reading lamp on and off.
Directing the lamp
CAUTION! RISK OF BURNS
DUE TO
HOT SURFACES!
First allow the lamp to cool
completely.
Bend the flexible arm
4
to bring the reading
lamp into the desired position.
Adjust the uplight head to the desired position.
Care and cleaning
RISK OF ELECTRIC SHOCK!
First pull the mains plug
9
out of the mains socket.
CAUTION! RISK OF BURNS
DUE TO
HOT SURFACES!
First allow the lamp to cool
completely.
RISK OF ELECTRIC SHOCK!
For electrical safety reasons, never clean the lamp
with water or other fluids nor immerse it in water.
Do not use any solvents, petrol or similar. This
would cause damage to the light.
Always use a dry, fluff-free cloth for cleaning.
Plug the mains plug
9
into the socket again.
Disposal
The packaging and ancillary packing
consist entirely of environmentally-
friendly materials. They can be disposed
of at your local recycling facility.
The symbol of the wheelie bin with the line
through it means that, in the European
Union, the product has to be disposed
