17
GB/IE
Start-up
Secure the spacer
19
to the light using the
designated screws
25
.
Place the washers
20
onto the spacer
19
.
Now place the glass plate
24
onto the bracket
and secure with the plain washer
21
and loca-
ting screw
22
.
Install the chrome decorative rings
23
by push-
ing them into the designated openings in the
glass plate
24
(see Fig. D). Be sure they are
positioned correctly.
Model 14107908L and 14108108L and
14108002L
Remove the screws
11
visible at the side of
the connection housing
4
and remove the
mounting angle
2
from the back.
Use the slotted holes in the mounting bracket
2
intended for the screws to mark the bores.
Now drill the fixing holes (approx. 6 mm,
depth approx. 40 mm). Be careful not to
damage the supply line.
Insert the dowels
1
into the bores.
Fasten the mounting bracket
2
with the
provided screws
3
.
Feed the power cord (external)
12
through the
cable guides
13
.
Now connect the external lead of the light to
the mains cable (external)
12
using the termi-
nal block
14
.
Note:
Be sure to correctly connect each of the
individual wires of the mains connection cable
(external): live wire, black or brown = symbol
L, neutral wire, blue = symbol N, earth wire,
green-yellow = symbol .
Now use the screws
3
to screw the light to
the mounting bracket
2
.
Align the lamp arm
5
in the desired direction
(14107908L and 14108108L).
Mark the mounting holes for the ceiling
mount
7
. Be sure the bores are always locat-
ed between two spotlights
10
. This ensures a
more secure hold.
Make the mounting holes (approx. 6 mm,
approx 40 mm deep) for the ceiling mount
7
.
Insert the plugs
6
into the bores. Secure the
ceiling mount
7
using the included screws
(small screw head).
Screw the ceiling mount clips
9
into the
ceiling mount
7
.
Clamp the lamp arms
5
into the ceiling mount
clips
9
.
Model 14107908L and 14108002L
Push a protective ring
16
into the opening in
each light glass
17
.
Secure the lamp glass
17
to the spotlight
10
using the pins
15
.
Screw the light bulb
18
clockwise into the
socket. Check for correct seating.
Use a clean, lint-free cloth to insert the light bulbs.
Insert the light bulb by screwing in the GU10
light bulb with a ¼ turn clockwise (model
14108002L) or by carefully screwing in the
E14 light bulb in a clockwise direction. Ensure
that it is positioned correctly.
Model 14108108L
Loosen the threaded ring
26
from the socket.
Place the bulb
17
carefully over the fitting and
fasten it in place by
tightening the threaded
ring
26
using the supplied tool
27
. Be sure it is
correctly positioned.
Use a clean, lint-free cloth to insert the light bulbs.
Insert the E14 light bulb by carefully screwing
it in a clockwise direction. Check it is correctly
positioned.
Your light is now ready to use.
Reinsert the fuse or switch the circuit breaker
back on.
Directing the spotlight
Only change the direction of the spotlights
10
when the light is switched off.
Allow the lamp to cool off completely.
Position the individual spotlights
10
by their
base. The spots can be turned by approx. 320°.
