10 GB
street lighting. This can influence
its functioning.
Connecting the lamp
Open the connection box
6
by using a crosshead screw
driver to loosen the fixing
screws
12
of the connection
box (Fig. B).
Run the flexible supply line,
type H05RN-F 3G 1.0 mm
2
,
through the cable gland
14
and into the connection box.
The length for the flexible
supply line should not exceed
2.5 m. Open the terminal block
13
by using a cross-head screw
driver to loosen the fixing screws.
Fix the connection cable by
turning the nut of the cable
gland (Fig. E).
Attach ferrules to the wires of
the supply line. Also attach the
cord anchorage
18
to the
supply line and use pliers to
tighten it on the supply line
(Fig. D). Connect them with the
terminal block
13
in the con-
nection box. Pay attention to
the markings on the terminal
block (L for live, N for neutral
and for the earth wire)
(Fig. E). Close the terminal block
again by fastening the fixing
screws.
Place the protection plastic
cover
19
on the terminal block
(Fig. F).
Close the connection box
again by fastening the fixing
screws (Fig. G).
Wall Mounting
Place the mounting bracket
5
on the wall and mark the fas-
tening holes for the mounting
bracket.
Now drill the fastening holes
(Ø 8 mm) and push the wall
plugs
1
into the drill holes.
Insert the included screws
3
into the washers
2
(Ø 20 mm).
Fix the mounting bracket on the
wall using the screws provided.
Align the spotlight
4
into the
desired direction. For this, you
may need to slacken the lock-
ing screws
7
of the hinge joint.
Summary of Contents for 271694
Page 3: ...A 5 6 11 10 8 4 2 3 1 B 6 9 7 12...
Page 4: ...E 13 C D 18 18 14 20...
Page 5: ...F G 19...
