14 GB/IE
Changing the ... / Maintenance and cleaning / Disposal / Warranty and service
replaced by the manufacturer, its service repre-
sentative or an equally qualified professional.
Before every use, verify the available mains
voltage matches the required operating voltage
of the light (see „Technical data“).
Always unplug the mains supply or the plug,
respectively, from the mains prior to assembly,
disassembly, cleaning, or when the light will
not be used for extended periods.
The light bulbs used are not suitable
for external dimmers or electronic
switches.
Only use the light bulb in a dry
environment.
Safe working
Position the lamp so that it is protected from
moisture and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the LED from a close distance
during operation.
Do not look into the LED with an optical instrument
(e.g. magnifier).
In order to disconnect the lamp completely
from the power supply, the mains plug must be
removed from the socket.
Do not install the lamp on pipes.
Do not leave the lamp unattended when in use.
Excessive heat build-up can result in fire.
This lamp is not suitable as a night light.
Do not attach the lamp to a damp or conductive
substrate.
Initial use
Installation
Remove all packaging materials from the lamp
before installing.
Remove the screws
11
visible on the side of the
connection housing
5
and remove the mount-
ing bracket
10
at the back.
Mark the drill holes using the slotted holes in
the mounting bracket
10
intended for the
screws
12
as a guide.
Now drill the mounting holes (approx.
Ø 6 mm, depth approx. 40 mm).
Be careful not to damage the power supply line.
Insert the wall plugs
9
into the drilled holes.
Attach the mounting bracket
10
using the
screws
12
provided.
Now use the screws
11
to attach the lamp to
the mounting bracket
10
.
Carefully insert the LED light bulb
2
into the
bulb socket and turn it clockwise to tighten it.
To do this, use the included suction cup
3
.
Check that it is positioned correctly.
Plug the mains plug
7
into a professionally
installed plug socket.
Your lamp is now ready to use.
Switching the lamp on / off
Switch the lamp on or off using the ON / OFF
toggle switch
6
on the connection housing
5
.
Adjusting the lamp
Note:
Only adjust the direction of the lamp
head
1
when the lamp is switched off.
Move the flexible arm
4
to the desired
position.
Changing the light bulb
RISK OF ELECTRIC SHOCK!
First unplug the mains plug
7
from the plug
socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
First allow the lamp to cool down completely.
Safety / Initial use / Changing the light bulb
