Livarno Living 317602, Instructions For Use Manual

Page: 13 / 14

15
Congratulations!
You have chosen to purchase a high-quality item.
Familiarise yourself with the item before using it
for the first time.
Read the following instructions for
use carefully.
Only use this item in the manner described and
for the purpose for which it is intended. Store
these instructions for use carefully. When passing
the item on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x backrest (1)
1 x seat (2)
1 x cruciform base (3)
1 x seat plate (4)
lever for height adjustment (4a)
1 x lever handle (5)
1 x gas spring (6)
1 x gas spring cover, 3-part (7)
5 x castor (8)
4 x screw, short (9)
4 x shim (10)
4 x screw, long (11)
1 x allen key (12)
1 x instructions for use
Technical data
Suitable for children between the ages of
4 and 11
Seat height: approx. 345 - 440mm
Size category 4 as per DIN EN 1729-1:2016
Castors suitable for soft floors
60 Maximum load: 60kg
Date of manufacture (month/year):
03/2019
Intended use
The product is not intended for commercial use.
The product is designed for private use indoors.
GB
Safety instructions
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation!
Risk of injury!
• Before using the product check for correct
stability.
• Position the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• The product is not for climbing on or playing
with! Make sure that people, especially chil-
dren, do not pull themselves up on the product
or lean against it. The product may tip over.
• Check the product before use each time for
damage or wear. The product may be used
only when in good working order and condi-
tion!
• Make sure that the product is assembled cor-
rectly and in accordance with this instruction
manual. If assembly is not performed correctly
this can lead to injuries and may also compro-
mise safety and function.
• The gas spring may only be replaced or
repaired by trained and qualified personnel.
• Never stand on the product.
Assembly
Note: Ask your dealer about castors that are
suitable for your floor.
1. Turn over the cruciform base (3) and insert
the castors (8) into the respective guides (3a)
(fig. B).
2. Put the cruciform base (3) on the castors.
3. Next insert the gas spring (6) into the cru-
ciform base and then place the gas spring
cover (7) on the spring (6) (fig. C).
4. Screw the seat plate (4) with the lever for
height adjustment tightly to the underside of
the seat (2) (fig. D).
Note:
Be sure to align the seat plate correctly.
5. Press the backrest (1) onto the seat (2) and
attach the backrest using the long screws (11)
(fig. E).
Note: Turn the screws loosely at first and tighten
them when the product is completely assembled.