![background image](http://html1.mh-extra.com/html/little-wonder/e-system/e-system_owners-manual-and-safety-instructions_1929718006.webp)
5
Assembling the line trimmer
1. Locate and open sealed bag with 3 screws, 3 split washers,
clamp plate #2 and L-pin. (Picture 1)
2. Remove plastic tube and gear case cover #4 from the
threaded shaft.
3. Place plastic guard over the gear case flange, and place
clamp plate #2 over the plastic guard. Align holes and
attach it with three screws to the trimmer attachment
assembly. (Picture 3)
4. Place gear case cover #4 onto the gear shaft.
(Picture 4)
5. Lock the gear shaft by inserting the supplied pin through
the slot in the plastic guard and into the aligned openings
in the gear case cover and gear case (Picture 5). Screw in
the spool holder with the spool to the gear shaft by turning
it counter clockwise (Picture 6). Hand tighten it securely
and remove pin. (Picture 7)
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6
Picture 7
1
2
3
4
Plastic guard