9
LITTLE WONDER
BEDSHAPER
OPERATION
STARTING THE ENGINE
1. Your machine has a pull ring choke
(C).
Pull the
ring out to choke the engine.
2. Move the throttle
(B)
to about half throttle. Start
the engine. See engine operator's manual
shipped with your machine for details on starting.
3. Before engaging blade be sure all bystanders,
especially children and pets, are clear of
operating area.
4. Blade should be out of the ground, in the
transport position.
5. Set engine speed about half throttle. Refer to
the engine operator's manual shipped with your
machine.
6. Engage Blade Engagement Lever
(D)
.
7. Adjust engine speed to full throttle.
8. Smoothly push Blade Lift Lever
(A)
forward to
lower blade into the ground.
9. Engage the Operating Speed Control Lever
(E)
smoothly to propel the machine forward.
10. Operating speed is achieved by sliding the
control handle forward. Then slowly engage
(Squeeze) the lever.
(Figure 1)
11. Transport speed is achieved by sliding the control
handle reward. Ten slowly engage (squeeze) the
lever.
(Figure 2)
STOPPING THE ENGINE
1. Release Operating Speed Control Lever
(E)
to
stop forward travel.
2. Pull back on Blade Lift Lever
(A)
.
3. Release Blade Engagement Lever
(D)
.
4. Reduce engine speed to an idle.
5. Move throttle lever to OFF position to shut off
engine.
FIGURE 1
FIGURE 2
