![background image](http://html1.mh-extra.com/html/little-wonder/bedshaper/bedshaper_owners-manual-and-safety-instructions_1929693010.webp)
8
LITTLE WONDER
BEDSHAPER
OPERATION
PRE-OPERATION CHECK LIST
(OPERATOR'S RESPONSIBILITY)
-
Review and follow all safety rules and safety
decal instructions.
-
Check that all safety decals are installed and in
good condition. Replace if damaged.
-
Perform a visual inspection of:
- blade drive belts for tension and alignment.
- blade for secure mounting.
- shields and safety equipment.
- all hardware to ensure it is properly installed
and secure.
-
Check that all hardware is properly installed and
secured.
-
Check to be sure engine is free of dirt and
debris. Pay particular attention to the cooling
fins, governor parts and muffler. Clean air intake
screen. Check air cleaner; service is necessary.
-
Inspect area. Remove stones or other hard
objects that might cause damage.
-
Check that there are no underground utilities in
work area.
-
Check all lubrication points and grease as
instructed in manual.
BEFORE STARTING THE ENGINE
1. Be familiar with the controls, how each functions,
and what each operates.
2.. Check engine oil level. Add oil if necessary,
following the engine manufacturer's
recommendations. Refer to engine manual
supplied with machine.
4. Fill the fuel tank with the amount and type of fuel
recommended by the engine manufacturer.
Gasoline is extremely
flammable and highly
explosive under certain
conditions. BE SURE
to install fuel cap after
refueling.
Fill fuel tank with good quality, clean, unleaded
regular gasoline to the level recommended by
the engine manufacturer.
TO CHECK OR ADD FUEL:
-
Use a funnel to avoid spilling.
-
Do it outdoors.
-
Do not smoke.
-
Stop the engine; allow to cool.
- Do not overfill.
-
Clean up spilled fuel.