Little Sparrows Technologies Bili-hut Home, Use Manual, Page: 41 / 56

35
Section 5: Troubleshooting
The following are a list of problems that may occur while
using the bili-hut™ .
DO NOT attempt to service the bili-hut™ or its components
beyond the instructions given in the following troubleshooting
scenarios. If these steps below do not solve the problem,
contact a Little Sparrows Technologies representative for
assistance using the contact information in Section 6 .
Section 5: Troubleshooting
# Problem Action
1 The
Environment
High
Temperature
Warning
remains on after
following the
troubleshooting
instructions in
Section 3.4
.
Contact Little Sparrows Technologies
for assistance.
2 Your baby is too
cold.
1. Remove your baby from the
bili-hut™ and warm your baby,
ideally using skin-to-skin care.
2. If possible, adjust the ambient
temperature of the room or move
the bili-hut™ to a warmer area.
NEVER place the bili-hut™ near a
space heater or other heat-emitting
device.
3 Your baby is too
warm.
1. If the Environment High
Temperature Warning is on, refer to
Section 3.4 .
2. Otherwise, remove your baby and
take his or her body temperature
again. Notify your baby’s healthcare
provider if you have concerns that
your baby has a fever.