OWNERS MANUAL | Model: LPR12 Jnr MX V1.0
30 |
P a g e
Maintenance Procedures: (continued)
5) How to install the rear wheel:
Step 1:
With axle cable cutout facing forwards, align the drive washer as pictured below, slide wheel
into rear dropouts on the frame.
Step 2:
Tighten wheel nuts finger tight and then align the band brake to line up with the brake torque
arm bolt bracket on the frame. Install bolt finger tight as per the picture below.
Step 3:
From the rear of the bike, look along the bike and align the wheel so it is straight with the
frame. Tighten the axel bolts using an 18mm spanner (Torque 50Nm).
Step 4:
Tighten the brake torque arm bolt and nut. Fit cable anchor bolt and tighten.
Step 5:
Adjust brakes as per the brakes adjustment section (page 26).
Step 6:
Connect the motor connector plug ensuring to align the arrows on each plug.
Fit a new cable tie and ensure the cable is secure.
Fit the cable protector and tighten using a 2.5mm hex key
Summary of Contents for LPR 12 JNR MX
