background image

Dear valued Little Labs customer, 

 

Congratulations on your purchase of the Redeye 3D Phantom. 

This box is s the new improved major revision of the popular 

Little Labs Redeye direct box / re-amp box. More people are 

re-amping now than ever before, and we at Little Labs know 

re-amping! We made this new major Redeye revision because we 

wanted to make sure we continued to make the best sounding, 

most flexible, easiest to use, and reasonably priced re-amping 

and direct box product available.
For easy accurate re-amping the Redeye 3D lets you listen thru 

your whole recording chain, from Redeye 3D direct box, to mic 

pre to DAW (or tape machine), to Redeye 3D Re-amp, to your 

guitar amp. In DI (direct box) mode the instrument / re-amp out 

on the front of the Redeye 3D works as a thru signal so you can 

simultaneously feed your guitar amp while supplying a signal 

from the rear xlr to your mic pre and DAW or tape machine. In 

re-amp mode the instrument / re-amp out on the front of the 

Redeye 3D signal comes from the line level output of the DAW 

or tape machine (converted to HI z guitar level signal) to feed 

your guitar amp. This simple way of listening thru the chain (re-

amp mode) and being able to bypass the mic pre and DAW or 

tape machine in the chain (DI mode) makes level adjustments a 

snap. This also assures you a re-amped guitar sound that will 

be exactly what was heard when laying down the track.
The Redeye 3D phantom - the now even smarter flexible 

audio tool to aid you in all stages of your production.  

This manual is preliminary, meaning it will be full of typos and 

grammatical errors,  but it should get you started.
Yours truly,
Jonathan Little

guitar am

p

acti

ve

 bu

ff
er

ed

 

instrument inpu

t

instrument

/

 

re

-amp ou

t

instrument/

re

-amp

 

le
ve

l

po
we

r

re

de

ye

 

3D

 

phanto

m

 

simultaneous di/r

e-amp/

ex

p splitter

eart

h

lift

di 

/

re

-amp

re

-amp

ov

er

driv

e

instr/

re

-am

p

 

polarity

 

 

 mic pr

e

from redeye 3d mic level out

to mic pre mic in (with phantom power on)

guitar with ac

tive pick ups

 use the rear instrument

 input jack

from mic pre line out to D

AW

 or tape machine input

from 

DA
W or tape machine line

 output to redeye3d line in

instrument/re

-amp out

 to guitar amp input

guitar with passive pick ups

 use the front instrument input jack

Redey

e 3d fron

t

Redey

e 3d rear

DA
W or

 T

ape Machin

e

r

ede

y

e 3D phant

om
 

comple

t

e r
e-amping c

hain

Summary of Contents for Redeye 3D Phantom







Reviews: