Pre-cut Value Gambrel - 4’ & 6’ Sidewalls
AssEmbLy InsTruCTIOn mAnuAL
7
Assembly Instruction Manual
© 2020 Little Cottage Co.
*Please Note: a 4’ sidewall uNit was used for Pictures showN*
30.
Measure 3 1/2” out from the edge of the 2x4 plate
and secure with 2” nails.
31.
Next layout 2x4’s, as shown for the door wall. See
wall layout for correct measurements.
32.
Secure 2x4 plates as shown with 3” nails. Make sure
it is flush.
33.
Continue fastening the wall.
34.
Install the 2x4 with notch, on top of the header.
Secure with 3” nails.
35.
Temporarily install the piece of 7 1/6” x 3 1/2” x 20”
OSB to the 2x4 that is attached to the middle of door,
as shown. Measure out 5 1/2” and fasten with 1 1/4”
blackheaded screws.
Repeat on other side.
3 1/2”
