Pre-Cut Value Gable Shed/Value Workshop Shed
ASSemBly InStruCtIOn mAnuAl
6
Assembly Instruction manual
© 2020 Little Cottage Co.
*PleASe nOte: A 10’X14’ WOrKSHOP SHeD WAS uSeD FOr PICtureS SHOWn - yOur lAyOut mAy VAry*
25.
Continue with Smartside and fasten with 2” nails
every 6 to 8 inches.
26.
Lay wall to the side as
shown.
27.
Using the wall layout diagram sheet, locate the wall
plates and studs as shown.
28.
Secure with 3” nails as shown.
29.
Using the wall layout diagram sheet, locate the truss
pieces, layout and fasten with 3” nails as shown.
30.
Measure out 3 7/8” from the edge of the top plate to
the end of the truss.