Pre-Cut Value Gable Shed/Value Workshop Shed
ASSemBly InStruCtIOn mAnuAl
8
Assembly Instruction manual
© 2020 Little Cottage Co.
*PleASe nOte: A 10’X14’ WOrKSHOP SHeD WAS uSeD FOr PICtureS SHOWn - yOur lAyOut mAy VAry*
37.
Make sure the small piece of Smart side is installed at
the top. Repeat with the opposite wall.
38.
For rake installation, measure 2” from the edge of the
Smartside siding, and mark with pencil as shown.
39.
Continue using the same method as step 38.
40.
Now install the rakes. Keeping them flush at the
bottom and secure with 3” nails.
41.
This is what the walls will look like when complete.
42.
Now install the first wall, standing it up on the floor.
