© 2018 Littelfuse Fresh Water Pumping
Littelfuse.com/Pump-Protection
37
460-15-100-LLS
Dimensional Drawing
460-15-100-LLS - DIMENSIONS
2.350
DIN Rail Mount
Installation Instructions
TYPICAL WIRING DIAGRAM FOR 460-15-100-LLS
Operation
When a conductive liquid makes contact with the probe it will
cause the relay to change state after the debounce time is
satisfied. The Run LED indicates that liquid is not present, and
the Stop LED indicates that liquid is present.
Settings
1. Debounce Adjustment:
This adjusts the amount of time that a conductive liquid is in
contact with the probe before the relay changes state.
Note:
If the time dial is changed, the new setting will take
effect immediately, minus any time that has already elapsed.
2. Logic Jumper:
Logic Jumper Installed:
Relay closes when conductive liquid
is in contact with the probe.
Logic Jumper Removed:
Relay opens when conductive
liquid is in contact with the probe.
Liquid Level Protection
Sensor and Control Relays
