background image

Lithionics Battery LLC |2013 

 

1. Product Warranty 

1.1 - Product Warranty:  

Warranty: See WARRANTY STATEMENTS Document, Revision July 2013.

 

 

1.2 - Warranty Registration: 

To ACTIVATE your product warranty please visit: 

www.LithionicsBattery.com

 and click the red “WARRANTY” tab 

at the top, then fill out the warranty submission form and click “SUBMIT”.  

 

The NeverDie® Battery Warranty Does Not Cover Damage to the Battery By Short Circuiting the Terminals.    Be sure the 
battery is OFF, using a volt meter before installation.    

 

2. Operating Environment 

 

2.1 - UNDOT Specification:

  

All Lithionics Batteries are tested to comply with United Nations DOT Manual 38.3 requirements.   
Please contact Lithionics Battery for a copy of this safety testing protocol.    UN DOT testing ensures 
battery safety during commerical shipping and transportation operations.    It represents the most 
severe testing available.    Passing this testing does not ensure that the Battery will continuously 
perform to these test standards in your application. 

THIS TEST DOES NOT CERTIFY THAT YOUR BATTERIES WILL ENDURE IN THIS ENVIRONMENT….IT IS A 
TEST OF SAFETY TO SIMULATE CRASH CONDITIONS OR SHIPPING DAMAGE

 

2.2 - Water/Moisture Specification:

 

All Lithionics Batteries are water resistant, not waterproof. This means the battery is protected against 
falling water when tilted up to 15 degrees in each direction from normal upright operating position. 
Do NOT submerge the battery as it will cause permanent damage. 
 

2.3

 

- Temperature Specification: 

See Page 1 of this Document for Operation Temperature Ranges Allowed 

 

 

 

 

You will notice the yellow label pictured at left is on your battery.   This will allow you to 
understand if your battery is too close to an external heat source and whether that temperature 
is too high for the battery.     Ideally, the max. temperature reading should be 120 degrees F.  
You will know that because the bottom 4 silver squares will go black.     If you approach 130 
degrees F, that will adversely affect the battery over time.    At 140 F, your warranty is void.  If 
you see the temperature rising, contact us and we can provide thermal management solutions. 

Summary of Contents for NeverDIE









Reviews: