Locate rubber washer, threaded washer, finial
plate, and finial that were removed on the
previous page. Place rubber washer inside glass
shade over center hole. Raise glass shade in
order to guide pull chains through
corresponding holes at the bottom of the glass
shade. Align hole in center of glass shade with
threaded rod on light kit fitter and push up
gently until threaded rod comes through hole.
(Be sure pull chain for fan operation does not rub
against bulbs during operation.)
Secure glass
shade with threaded washer.
Note
:
Do NOT
overtighten threaded washer as glass may crack
or break.
Align hole in center of finial plate with
threaded rod, allowing the pull chains to come
through appropriate holes in finial plate and
push up. Thread center pull chain through hole
in finial and re-attach finial.
Note
:
Do NOT overtighten final as glass may
crack or break.
Attach pull chain extensions supplied or
custom pull chain extensions (sold separately)
to ends of the pull chains.
Proceed to Section 10 on page 10 to complete
installation with light kit.
9. Light Kit Assembly (Optional). (cont).
page 8
pull chain extensions
glass shade
light kit
fitter
finial plate
threaded
washer
finial
rubber
washer
motor housing
