(6)
The Windows XP Setup screen will appear again saying “Setup
will load support for the following mass storage devices”. The
list will include “WinXP Promise SATA150 TX2Plus (tm) IDE
Controller”.
Note
If you need to specify any additional devices to be installed, do
so at this time. Once all devices are specified, continue to the
next step.
If you are using a driver that has not been digitally signed by
Microsoft, you will be asked if you want to continue the
installation. Click on “
Continue Anyway
”.
Installing Driver in Existing Windows XP System
Warning
If you are going to moving the current boot drive containing the
existing Windows XP operating system to the onboard
SATA150 ports, the SATA150 TX2Plus driver MUST be
loaded on to this hard drive while it is still attached to your
existing hard drive controller. Do not attach this drive or any
other hard drive to the SATA150 ports before completing this
step.
(1)
Insert the LITE-ON installer CD into the CD drive.
(2) Click
“Manual Setup\Serial ATA Driver”
to start the
installation.
76
