3.
Advanced Chipset Setup
This setup page includes a chipset configuration parameters. This menu
is used to modify the parameters of the chipset on the motherboard.
Since these parameters are closely related to hardware, if the altered
parameters are not correct, the mainboard will become unstable or not
booting up.
AMIBIOS SETUP – ADVANCED CHIPSET SETUP
(C)2001 American Megatrends, INC. All Rights Reserved
******** DRAM Timing ********
Available Options:
SDRAM Frequence
Auto
200Mhz
Configure SDRAM Timing by SPD
Enabled
266Mhz
SDRAM CAS# Latency
2.5 Clocks
333Mhz
SDRAM RAS# Precharge
3 Clocks
Auto
SDRAM RAS# to CAS# Delay
3 Clocks
SDRAM Precharge Delay
7 Clocks
SDRAM Burst Length
4
APIC Interrupt Mode
Enabled
MPS Revision
1.1
AGP Aperture Size
64MB
USB Controller
6 USB Ports
USB 1.1 Device Legacy Support
Disabled
ESC
: Exit
: Sel
PgUp/PgDn
: Modify
F1
: Help
F2/F3
:Color
SDRAM Frequency:
This section allows you to define the operating frequency of the
SDRAM used on the system. There are four options to choice from:
200Mhz, set the DDR SDRAM to operate at 200Mhz.
266Mhz, set the DDR SDRAM to operate at 266Mhz.
333Mhz, set the DDR SDRAM to operate at 333Mhz.
Auto, set the DDR SDRAM operating speed by SPD.
44
