37
Playback
Audio
[SVCD]
If the SVCD being played is recorded with multitracks
(containing different languages or different types of
sound), you can change the tracks during playback.
Available numbers of track vary depending on the SVCD
you are watching.
..........................................................................................
Sound
[SVCD][VCD]
You can select the output speaker(s) of the sound of a
VCD or SVCD. Select ‘Normal’, if you would like to
listen the sound from both left and right speaker.
1.
Select ‘Sound’, then press
ENTER
.
2.
Select from ‘Normal’, ‘Left’ or ‘Right’, then press
ENTER
.
..........................................................................................
Angle
Some pre-recorded DVD discs contain scenes which have
been shot from different camera angles. You can choose to
view these camera angles during playback.
1.
Select ‘Angle’, then press
ENTER
.
2.
Select a camera angle, then press
ENTER
.
Playback_02_06
..........................................................................................
Information
During playback, you can select to show the disc informa-
tion on the top of the screen or to hide it.
1.
Select ‘Information’, then press
ENTER
.
2.
Select ‘On’ or ‘Off’, then press
ENTER
.
Playback_02_07
If you select ‘On’, disc information will be displayed on the top of
the screen.
Different categories of information will be shown
depending on the media type.
Playback_02_01
3.
When playback reaches the end of the desired session,
press
to select ‘Point B’, then press
ENTER
.
Repeat from point A to point B will start.
4.
To cancel the repeat mode, press
to select
‘Cancel’, then press
ENTER
.
If you exit the function, setting only point A, the
preset point A will still be valid when you enter the
‘A-B Repeat’ function next time.
The ‘Cancel’ function is only available when both
point A and point B are set.
The ‘A-B Repeat’ setting will be canceled when you
bring the program to a marked stop or a full stop.
..........................................................................................
Subtitle/Audio
[DVD]
Some pre-recorded DVD discs have more than one
subtitle/audio language. The language initially selected
for playback will be the one you select when you first set
up the DVD recorder. Nevertheless, you can change the
subtitle/audio language of the disc at any time.
Introducing System Setup (p.14)
1.
Select ‘Subtitle’/ ‘Audio’, then press
ENTER
. All the
available subtitle/audio languages will be displayed.
Playback_02_03
Playback_02_05
2.
Select a language, then press
ENTER
.