285-31404
www.litehawk.ca
7
How to charge the Litehawk HIGH ROLLER:
Comment charger le Litehawk HIGH ROLLER:
Air/Ground:
Place the HIGH ROLLER on a flat surface. Press
the indicated button to switch between flying
and rolling.
Standard/Sport:
In Sport Mode all controls are more responsive.
Your HIGH ROLLER comes factory set in
Standard Mode.
Standard/Sport:
In Sport Mode all controls are more responsive.
Your HIGH ROLLER comes factory set in
Standard Mode.
Air/Sol:
Placez le High Roller sur une surface plane.
Appuyez sur le bouton indiqué pour basculer
entre voler et rouler.
Charging from the USB - Plug the USB into your USB port. Plug the other end of the cable into your Litehawk HIGH
ROLLER. The LED light on the USB will turn RED, once your heli is charged the LED light will go out.
Recharge USB - Branchez le fil USB dans la prise USB de votre ordinateur, et l'autre bout du fil dans votre LiteHawk
HIGH ROLLER. Le DEL sur la prise USB sera rouge, quand l'hélicoptère est rechargé, la lumière s'éteint.
Pre Flight Procedure - IMPORTANT!
- Plug the battery into the HIGH ROLLER and place HIGH ROLLER on the included stand.
You will see a
flashing white light on the
HIGH ROLLER
come on.
- Turn ON the remote control -
You will see a flashing red LED light and audible beep indicating the power is on.
- Move the left stick on the remote up and down once - In a few seconds the white LED on the HIGH ROLLER will be
solid. This indicates that the model and the controller are bound. If the white LED is blinking slowly, they are not
bound and you must repeat the process.
- Your HIGH ROLLER is now ready for it's flight. More details are available at www.litehawk.ca