7
© LITEGEAR INC. 2015
www.litegear.com
QUICK START GUIDE
(CONT.)
Quick, step-by-step guide to get your LiteMat up and running.
3. Installing a diffuser
After securing the PolySkirt to the LiteMat, select the diffuser you would like to use, and ensure that the Velcro®
fastener is positioned on the outside edge. Then, noting orientation, attach the Velcro® fastener section to the
inside of the PolySkirt on its upper Velcro® perimeter.
4. Attaching the Parasquare® Louver
After attaching both the PolySkirt and the
diffuser, position the Parasquare® Louver in front
of the diffused LiteMat with the small squares
toward the LiteMat and the larger squares facing
outward. Next, securely fasten all provided
Velcro® straps to the PolySkirt and LiteMat.
Finish by ensuring that the Parasquare® Louver is
securely fastened.
Using the Parasquare® Louver
without a diffuser
may create irregular results and is not recommended.
