30
Specifications
Technical Specifications
Input Voltage: 100-240 VAC, 50/60 Hz
Input Current: 4.5A to 9A
Output Voltage: 48VDC
Output Current: 14.7A to 21A
Data Connectors: USB-A, 2x EtherCon, 5-Pin DMX In and Thru, Internal CRMX Antenna
Data Connectors: PDX, 28-Pin Connector
Mains Power Connectors: powerCON TRUE1 TOP In and Thru (Edison/Schuko/Bare Ends cables available)
Control: DMX, RDM, CRMX (Art-Net, sACN coming soon)
Switches: On-board On/Off Switch
Power: 750W Maximum
IP Rating: IP20
Weight: 12.6 lbs (5.7 kg)
Dimensions: Height: 5.8 in (147.3 mm)
Width: 7.2 in (182.9 mm)
Length: 15.7 in (388.8 mm) Max Operating Temperature: 122°F (50°C)
Mounting: 2 k-Mounts (truss & stand mounts available)
Certifications: ETL, CE, UKCA, FCC
29
Error Codes
Pixel Faults
Com Flt: Faulty Dimmer to Pixel communications
Over A: Pixel current exceeds circuit rating. (1.8A)
Undr VW: Pixel supply voltage nears low voltage circuit rating. (44V)
Over VW: Pixel supply voltage approaches high voltage limit. (51V)
Over VF: Pixel supply voltage exceeds high voltage limit. (54V)
Dimmer Faults: (Dimmer faults and warning may trigger Red Status Led flash sequences on Dimmer front panel)
FLT: Fuse Comms Fail - Fuse related communications within the Dimmer has faulted. // 6 blink sequence
FLT: Undervolts - Dimmer internal supply voltage is below the low voltage circuit rating. // 2 blink sequence
FLT: Overvolts Warn - Dimmer internal supply voltage approaches high voltage circuit rating.
FLT: Overvolts - Dimmer internal supply voltage is below the low voltage circuit rating. // 2 blink sequence
FLT: Temperature Warn - Dimmer internal temperature approaches high rating. // 1 blink sequence
FLT: Over Temperature - Dimmer internal temperature exceeds high rating. // SOLID ON indicator
FLT: Overcurrent - Dimmer output current exceeds rating. // 2 blink sequence
FLT: Comms - Dimmer to Pixel communications fault. // RED 1 blink
FLT: Fuse Fail - Dimmer internal fuse(s) have failed. // R7 blink sequence
