Functions
Cue Function
Cue Function operates like global-presets with a dedicated playback screen. This feature consists of three “looks”
including two standard looks and one momentary look.
1. Set the 3-position rocker switch to the UP or DOWN position.
2. Set the color you would like to store in a cue.
3. Long-press the right encoder until the CUE screen appears.
4. To store a cue, long-press any one of the function buttons and the left encoder simultaneously.
5. To recall a cue, short press any of the cue function buttons.
6. The number (3) cue is a momentary cue recall.
7. To return to the color mode screen, short press the right encoder.
22
21
Functions
Parameter Presets
Parameter Presets exist for each main parameter, CCT, Accent Color, and Saturation. Six factories presets are available
at your fingertips. Easily invoke the feature by short-pressing the LEFT screen-side button. Three of the most common
presets are offered on the lower line of the display and a slight turn of the LEFT encoder shows additional options. A
short-press of the LEFT encoder cycles through parameters. In all, that are 216 possible combinations that can be
customized to match your workflow. To overwrite any factory preset, set the parameter to the desired value, then long-
press the associated screen-side button.
1. Set the 3-position rocker switch to the UP or DOWN position.
2. Press function button on the display below PRESETS to invoke Parameter Presets. Turn the left encoder to show
additional options.
3. 6 factory presets are available for each main parameter (CCT, ACCENT and SAT).
4. Manually exit Parameter Preset screen by simply pressing on left encoder. Screen auto-exits after 10 seconds.
