24
DMX
DMX Address
DMX Address mode allows the user to set a desired DMX Address.
1. Set the 3-position rocker switch to the CENTER position.
2. Press function button below SETTINGS.
3. Rotate the left encoder knob to navigate to DMX SETTINGS and press the left encoder knob to select.
4. Rotate the left encoder knob to navigate to DMX ADDRESS and press the left encoder knob to select.
5. Rotate the left encoder knob to set the desired DMX Address.
DMX
DMX Settings
DMX Settings allows the user to control the fixture through any DMX control device. The user can connect through
wired or wireless DMX. When using wired DMX it is possible to daisy-chain between units. New to OS2.5, DMX operation
now includes its collection of DMX settings that are separate from Local settings. When Spectrum detects DMX signal,
regardless of switch state, the system immediately takes precedence over local control. This can happen over XLR or
Lumen Radio wireless.
OS2.5 includes 15 intuitive and cinematic DMX profiles such as 8-bit and 16-bit with global, pixel, and gradient modes for:
- PLUS, TRUE HYBRID, and SPECTRUM modes.
OS2.5 also includes 8 more console-friendly DMX profiles in 8-bit and 16-bit for global and pixel modes:
- RGB, which offers simple 3-channel color with the addition of a True Hybrid white point at 6500K.
- RGB SPECTRUM, which is RGB control with an adjustable white point and GLOBAL intensity control.
- RDM FUNCTIONALITY Remote Device Management (RDM) implementation in OS2.5 enables compatible devices to
interact with the ballast by making inquiries as to settings and sensor data, or to make changes to settings such as
DMX start address.
- DMX STREAMING MONITOR is an essential feature for troubleshooting DMX networks. OS2.5 makes it possible to see live
streaming data of all 5 parameters of (up to) 12 LF-Pixels.
- LOSS BEHAVIOR allows for DMX signal on ballast to be interrupted when LOSS setting is active or maintain signal when
HOLD settings are active.
- DMX SERIES SELECT with new OS 2.5 firmware, LiteDimmer Spectrum AC600 can operate as previous Spectrum DC200
release as SERIES 1 and OS 2.0 release as SERIES 2. When performing a factory reset, SERIES 2.5 is the auto choice.
23
